Reviewing the NEW enhancement allowing the option to report the Supplementary Obtuse Angle when programming Angle Between from the 'Tolerance' ribbon. Requires CheckMate 14.0.00734 for SOLIDWORKS® or newer.
Read MoreTop Ten Tech Tips
Tech Tips Blog
Cecil Deline
Recent Posts
Topics: origin international, measurement, metrology, CheckMate for SOLIDWORKS
Reviewing the procedure to put a circle measurement inside cone geometry. Requires CheckMate 14.0.00734 for SOLIDWORKS® or newer.
Read MoreTopics: origin international, measurement, metrology, CheckMate for SOLIDWORKS
Reviewing the NEW enhancements, specifically Short Keys, to help when needing to flip features or add material condition. Requires CheckMate 14.0.00734 for SOLIDWORKS® or newer.
Read MoreTopics: origin international, CheckMate, CheckMate for SOLIDWORKS
Reviewing the NEW enhancements to help picking points on the workplane directly above the part. Requires CheckMate 14.0.00712 for SOLIDWORKS® or newer.
Read MoreTopics: origin international, CheckMate, CheckMate for SOLIDWORKS
Tech Tip #53 : Bug in Microsoft Windows compression utility
Posted by Cecil Deline on Thu, May 04, 2017 @ 11:28 AM
Reviewing a Bug in Microsoft Windows compression utility. (zip)
Read MoreTopics: Microsoft Compression Utility
Tech Tip #52 : Measuring Circle In Non Circular Hole
Posted by Cecil Deline on Fri, Jan 20, 2017 @ 01:21 PM
Reviewing how to create circle measurements with the CAD geometry that is a curved surface, in CheckMate for SOLIDWORKS®
Read MoreTopics: CheckMate for SOLIDWORKS
Reviewing the use of the CONVERT and CONVERT WITH CONSTRUCTION commands, in CheckMate for SOLIDWORKS®.
Read MoreTopics: origin international, measurement, Origin, CheckMate for SOLIDWORKS
Tech Tip #50 : Programming Rotating Circle Measurements
Posted by Cecil Deline on Thu, Nov 17, 2016 @ 10:08 AM
Reviewing the procedure to rotate all the measurement points, on an existing circle measurement, together all at once in CheckMate for SOLIDWORKS®.
Read MoreTopics: CheckMate for SOLIDWORKS
Tech Tip #49 : Installation Missing 'Heads Up View' Bar
Posted by Cecil Deline on Thu, Nov 17, 2016 @ 10:02 AM
Reviewing how to turn the "Heads Up View" bar back on, if it accidentally gets turned off, in CheckMate for SOLIDWORKS®.
Read MoreTopics: CheckMate for SOLIDWORKS
Tech Tip #48 : Datum Plane from Uneven Features
Posted by Cecil Deline on Thu, Oct 13, 2016 @ 09:30 AM
Reviewing the procedure for constructing a plane from surface measurements that are at different heights in CheckMate for SOLIDWORKS®.
Read MoreTopics: CheckMate for SOLIDWORKS