Description: When filling CheckMate statistical labels using CM14.00.0173 or newer, The Cp/Cpk's values are now color coded. The color coding is defined in the Reporting Defaults under "Threshold" (see picture). Any Cp/Cpk's above this value will be colored green. Any Cp/Cpk's below this value will be colored red.
Recent Posts
0 Comments Click here to read/write comments
Topics: origin international, SolidWorks, measurement, CheckMate for SOLIDWORKS
As more of our CheckMate customers are downloading and installing SOLIDWORKS® 2020, we have discovered a SOLIDWORKS® performance setting that is causing CheckMate picks in the graphics area to be projected to a workplane and not onto the CAD. The result is that measurements intended to be on the part are showing up out in space.
The solution that we have found is as follows:
1) Open CheckMate for SOLIDWORKS® but do NOT open any part files.
2) Got to <Tools/Options> and Select the heading on the left side called "Performance"
3) At the bottom of that page, uncheck the entry called "Enhanced Graphics Performance".
4) Quit out and restart CheckMate for SOLIDWORKS®
0 Comments Click here to read/write comments
Topics: SolidWorks, measurement, metrology, CheckMate for SOLIDWORKS
Reviewing how to set the appearance of the CheckMate Programming Browser, in CheckMate for SOLIDWORKS®
Read More
0 Comments Click here to read/write comments
Topics: origin international, CheckMate, Origin, CheckMate for SOLIDWORKS
Reviewing how to save your Probe A/B Angles to an INI file so they can be reused on your next CAD file, in CheckMate for SOLIDWORKS®
Read More
0 Comments Click here to read/write comments
Topics: origin international, CheckMate, Origin, CheckMate for SOLIDWORKS
Reviewing how to set a marker in the programming browser to insert new measurements, in CheckMate for SOLIDWORKS®
Read More
0 Comments Click here to read/write comments
Topics: measurement, Origin, CheckMate for SOLIDWORKS
This is the fourth video in a series of videos about CheckMate Coordinate Systems.
Read More
0 Comments Click here to read/write comments
This is the fifth and final video in a series of videos about CheckMate Coordinate Systems.
Read More
0 Comments Click here to read/write comments
Third video in a series of videos about CheckMate Coordinate Systems. This video reviews the Partial Coordinate System using CheckMate for SOLIDWORKS® Programming Module.
Origin Recommends watching the five videos in the following order:
1) Tech Tip #79-Master Coordinate Systems
2) Tech Tip #80-Local Coordinate Systems
3) Tech Tip #81-this video
4) Tech Tip #82-Forced Coordinate Systems
5) Tech Tip #83-Coordinate Systems & Segments
Read More
0 Comments Click here to read/write comments
Topics: origin international, SolidWorks, CheckMate for SOLIDWORKS
This is the second video in a series of videos about CheckMate Coordinate Systems. This video reviews the Local Coordinate System using CheckMate for SOLIDWORKS® Programming Module.
Origin Recommends watching the five videos in the following order:
1) Tech Tip #79-Master Coordinate Systems
2) Tech Tip #80-this video
3) Tech Tip #81-Partial Coordinate Systems
4) Tech Tip #82-Forced Coordinate Systems
5) Tech Tip #83-Coordinate Systems & Segments
Read More
0 Comments Click here to read/write comments
Topics: origin international, SolidWorks, CheckMate for SOLIDWORKS
This is the first video in a series of videos about CheckMate Coordinate Systems. This video reviews the Master Coordinate System using CheckMate for SOLIDWORKS® Programming Module.
Read More
0 Comments Click here to read/write comments
Topics: origin international, SolidWorks, CheckMate, CheckMate for SOLIDWORKS
This Icon is installed on the Desktop and the