Research Partner Open House
McMaster University will be holding an Open House on March 26, 2014.
As a research partner through the NSERC CANRIMT Research Network, Origin International has been collaborating with Dr. Allan Spence at McMaster in GD&T and inspection, including point cloud measurement.
Origin International will be in attendance at the Open House in the CMM area with a demonstration of CheckMate software for these applications.
__________________________________________________________
Allan D. Spence, Associate Professor, Mechanical Engineering McMaster University, JHE 316 1280 Main St. W., Hamilton, ON L8S 4L7 Email . adspence@mcmaster.ca Tel. 905 525-9140 x27130 Fax. 905 572-7944 Cell. 905 379-1378
0 Comments Click here to read/write comments
Topics: CheckMate, measurement, point cloud metrology, gd&t
As I browse the internet, I see that Sept/Oct brings about many manufacturing and quality shows where you can see what's hot and what's new. Read on to see what is happening and take note of the events listed on the left. If you want to see the Avro Arrow, then check it out.
0 Comments Click here to read/write comments
Topics: origin international, CheckMate, metrology, Origin
Hope you are enjoying your summer so far. This month we have some goodies to tell you about. For example, our tech tip and webinar although for CheckMate users are also for those of you using the Equator ™. Take a look...
0 Comments Click here to read/write comments
Topics: origin international, CheckMate, metrology, Equator, TransMagic, sheet metal stamping
On June 18-21, 2013, DMSC/QIF will hold their meeting to discuss Quality Measurement Standards. While there, ask to see Origin International's demo on CMEngine automatically converting CMM reports into QIF for use with QIF-compliant AS9102a report generating software.
1 Comment Click here to read/write comments
Topics: origin international, CheckMate, measurement, metrology, convert CMM reports
To read the news release summarizing the highlights of Origin's new web site please click the document icon.
4 Comments Click here to read/write comments
Topics: manufacturing engineers, LaunchRite, CheckMate, quality professionals
This year Origin marks its 20th anniversary. To read the news release describing some of Origin's more noteworthy achievements over the past two decades, please click the document icon.
0 Comments Click here to read/write comments
Topics: LaunchRite, CheckMate, point cloud metrology, flexible gauge