--- title: "Tech Tip #43 : Trim Checks" description: Reviewing the procedures for creating trim measurements in in CheckMate for SOLIDWORKS®. --- [![logo-tan](https://info.originintl.com/hs-fs/file-2255150996-png/Origin-img/logo-tan.png)](https://info.originintl.com/) # Top Ten Tech Tips # Tech Tips Blog ## [ All Posts](https://info.originintl.com/resources/tech-tips-blog/all) ## [Tech Tip #43 : Trim Checks](https://info.originintl.com/resources/tech-tips-blog/tech-tip-43-trim-checks) Posted by [Cecil Deline](https://info.originintl.com/resources/tech-tips-blog/author/cecil-deline) on Wed, May 25, 2016 @ 01:37 PM - [Tweet](https://twitter.com/share) Reviewing the procedures for creating trim measurements in in CheckMate for SOLIDWORKS®.   ## **CheckMate for SOLIDWORKS** ### Help Videos ![CMhelpVidsIcon](https://info.originintl.com/hs-fs/hubfs/CMhelpVidsIcon.jpg?width=78&height=101&name=CMhelpVidsIcon.jpg)This Icon is installed on the Desktop and the Start menu when CheckMate for SOLIDWORKS is installed. It is an index to all the videos which also includes the Tech Tips. You can also visit our [YouTube Videos](https://www.youtube.com/@OriginInternationalTechTips/videos) - [Contact Us](https://info.originintl.com/contact/) - [Careers](https://info.originintl.com/company/careers/) - [Press Room](https://info.originintl.com/resources/news-events) - [Privacy Policy](https://info.originintl.com/privacy-policy/) - [RSS](https://info.originintl.com/CMS/UI/Modules/BizBlogger/rss.aspx?tabid=224947&moduleid=405729&maxcount=25&t=ef217bd0-8562-4246-83fb-64eb6a91fb80) [![logo-tan](https://info.originintl.com/hs-fs/file-2255150996-png/Origin-img/logo-tan.png)](https://info.originintl.com/) © Origin International Inc. All rights reserved. Richmond Hill, ON, Canada 416 945-2553 | 800 269-2509 toll free