Top Ten Tech Tips

Tech Tips Blog

Blank SOLIDWORKS Installation Manager Solved

Posted by Cecil Deline on Mon, Dec 18, 2017 @ 02:44 PM

Blank SOLIDWORKS Installation Manager Solved
Read More

Tech Tip #62 : Inserting At Segment Start

Posted by Cecil Deline on Mon, Nov 13, 2017 @ 04:06 PM

Reviewing how to insert a CheckMate feature at the very begin of a program segment, in CheckMate 14.0.0774 (or newer) for SOLIDWORKS®.

Read More

Tech Tip #61 : Measuring Modeled Threads

Posted by Cecil Deline on Wed, Sep 06, 2017 @ 04:49 PM

Reviewing how to measure threads that are modeled in the CAD file, for CheckMate 14.0 for SOLIDWORKS®.

Read More

Topics: origin international, measurement, metrology, CheckMate for SOLIDWORKS

Tech Tip #60 : Circles On Curved Surfaces

Posted by Cecil Deline on Wed, Sep 06, 2017 @ 04:44 PM

Reviewing how to measure a circle that lies on a highly curved surface. Requires CheckMate 14.0.00734 for SOLIDWORKS® or newer.

Read More

Topics: origin international, measurement, metrology, CheckMate for SOLIDWORKS

Tech Tip #59 : Edge Point Measurement

Posted by Cecil Deline on Wed, Sep 06, 2017 @ 04:41 PM

Reviewing the NEW measurement feature, Edge Point. It's like a trim check but is designed when the edge is no perpendicular to the top surface. Requires CheckMate 14.0.00734 for SOLIDWORKS® or newer.

Read More

Topics: origin international, measurement, metrology, CheckMate for SOLIDWORKS

Tech Tip #58 : Dragging Trim Checks

Posted by Cecil Deline on Wed, Sep 06, 2017 @ 04:36 PM

Reviewing how to drag a trim measurement. Requires CheckMate 14.0.00734 for SOLIDWORKS® or newer.

Read More

Topics: origin international, measurement, metrology, CheckMate for SOLIDWORKS

Tech Tip #57 : Supplementary Obtuse Angle

Posted by Cecil Deline on Wed, Sep 06, 2017 @ 04:34 PM

Reviewing the NEW enhancement allowing the option to report the Supplementary Obtuse Angle when programming Angle Between from the 'Tolerance' ribbon. Requires CheckMate 14.0.00734 for SOLIDWORKS® or newer.

Read More

Topics: origin international, measurement, metrology, CheckMate for SOLIDWORKS

Tech Tip #56 : Circle Measurements In a Cone

Posted by Cecil Deline on Wed, Sep 06, 2017 @ 04:25 PM

Reviewing the procedure to put a circle measurement inside cone geometry. Requires CheckMate 14.0.00734 for SOLIDWORKS® or newer. 

Read More

Topics: origin international, measurement, metrology, CheckMate for SOLIDWORKS

Tech Tip #55 : Material Side Short Keys

Posted by Cecil Deline on Wed, Jul 05, 2017 @ 05:04 PM

Reviewing the NEW enhancements, specifically Short Keys, to help when needing to flip features or add material condition. Requires CheckMate 14.0.00734 for SOLIDWORKS® or newer.

Read More

Topics: origin international, CheckMate, CheckMate for SOLIDWORKS

Tech Tip #54 : Workplane Enhancements

Posted by Cecil Deline on Mon, Jun 12, 2017 @ 02:59 PM

Reviewing the NEW enhancements to help picking points on the workplane directly above the part. Requires CheckMate 14.0.00712 for SOLIDWORKS® or newer.

Read More

Topics: origin international, CheckMate, CheckMate for SOLIDWORKS