Top Ten Tech Tips

    Tech Tips Blog

    Tech Tip #61 : Measuring Modeled Threads

    Posted by Cecil Deline on Wed, Sep 06, 2017 @ 04:49 PM

    Reviewing how to measure threads that are modeled in the CAD file, for CheckMate 14.0 for SOLIDWORKS®.

    Read More

    Topics: origin international, measurement, metrology, CheckMate for SOLIDWORKS

    Tech Tip #60 : Circles On Curved Surfaces

    Posted by Cecil Deline on Wed, Sep 06, 2017 @ 04:44 PM

    Reviewing how to measure a circle that lies on a highly curved surface. Requires CheckMate 14.0.00734 for SOLIDWORKS® or newer.

    Read More

    Topics: origin international, measurement, metrology, CheckMate for SOLIDWORKS

    Tech Tip #59 : Edge Point Measurement

    Posted by Cecil Deline on Wed, Sep 06, 2017 @ 04:41 PM

    Reviewing the NEW measurement feature, Edge Point. It's like a trim check but is designed when the edge is no perpendicular to the top surface. Requires CheckMate 14.0.00734 for SOLIDWORKS® or newer.

    Read More

    Topics: origin international, measurement, metrology, CheckMate for SOLIDWORKS

    Tech Tip #58 : Dragging Trim Checks

    Posted by Cecil Deline on Wed, Sep 06, 2017 @ 04:36 PM

    Reviewing how to drag a trim measurement. Requires CheckMate 14.0.00734 for SOLIDWORKS® or newer.

    Read More

    Topics: origin international, measurement, metrology, CheckMate for SOLIDWORKS

    Tech Tip #57 : Supplementary Obtuse Angle

    Posted by Cecil Deline on Wed, Sep 06, 2017 @ 04:34 PM

    Reviewing the NEW enhancement allowing the option to report the Supplementary Obtuse Angle when programming Angle Between from the 'Tolerance' ribbon. Requires CheckMate 14.0.00734 for SOLIDWORKS® or newer.

    Read More

    Topics: origin international, measurement, metrology, CheckMate for SOLIDWORKS

    Tech Tip #56 : Circle Measurements In a Cone

    Posted by Cecil Deline on Wed, Sep 06, 2017 @ 04:25 PM

    Reviewing the procedure to put a circle measurement inside cone geometry. Requires CheckMate 14.0.00734 for SOLIDWORKS® or newer. 

    Read More

    Topics: origin international, measurement, metrology, CheckMate for SOLIDWORKS

    Tech Tip #55 : Material Side Short Keys

    Posted by Cecil Deline on Wed, Jul 05, 2017 @ 05:04 PM

    Reviewing the NEW enhancements, specifically Short Keys, to help when needing to flip features or add material condition. Requires CheckMate 14.0.00734 for SOLIDWORKS® or newer.

    Read More

    Topics: origin international, CheckMate, CheckMate for SOLIDWORKS

    Tech Tip #54 : Workplane Enhancements

    Posted by Cecil Deline on Mon, Jun 12, 2017 @ 02:59 PM

    Reviewing the NEW enhancements to help picking points on the workplane directly above the part. Requires CheckMate 14.0.00712 for SOLIDWORKS® or newer.

    Read More

    Topics: origin international, CheckMate, CheckMate for SOLIDWORKS

    Tech Tip #51: Converting Measurements

    Posted by Cecil Deline on Wed, Dec 21, 2016 @ 04:14 PM

    Reviewing the use of the CONVERT and CONVERT WITH CONSTRUCTION commands, in CheckMate for SOLIDWORKS®.

    Read More

    Topics: origin international, measurement, Origin, CheckMate for SOLIDWORKS

    Create High Resolution Images from SOLIDWORKS Models

    Posted by Janet Wiaderny on Wed, Aug 31, 2016 @ 04:28 PM

     

    Read More

    Topics: origin international, SolidWorks, CheckMate, graphics