CheckMate for SOLIDWORKS® is now available. The initial release features CheckMate CMM Programming, Soft Gauging, Reporting and SoftFit Solver ™ . Subsequent releases over the course of 2014 will include additional modules and new product. SOLIDWORKS® is the platform of choice for the CheckMate suite of CAD based dimensional metrology software based on the quality of the product, its level of penetration in the manufacturing sector and the level of excellence of the SOLIDWORKS® reseller channel. CheckMate for SOLIDWORKS® will serve to enhance our customers metrology experience and increase their productivity.
Origin News & Events
Research Partner Open House
McMaster University will be holding an Open House on March 26, 2014.
As a research partner through the NSERC CANRIMT Research Network, Origin International has been collaborating with Dr. Allan Spence at McMaster in GD&T and inspection, including point cloud measurement.
Origin International will be in attendance at the Open House in the CMM area with a demonstration of CheckMate software for these applications.
Allan D. Spence, Associate Professor, Mechanical Engineering McMaster University, JHE 316 1280 Main St. W., Hamilton, ON L8S 4L7 Email . email@example.com Tel. 905 525-9140 x27130 Fax. 905 572-7944 Cell. 905 379-1378
On June 18-21, 2013, DMSC/QIF will hold their meeting to discuss Quality Measurement Standards. While there, ask to see Origin International's demo on CMEngine automatically converting CMM reports into QIF for use with QIF-compliant AS9102a report generating software.
This month, Origin International has lots of little goodies to share with you. So read on and as usual we would appreciate your comments or feedback. If you know someone that may be interested in this newsletter, contact us at firstname.lastname@example.org or click the link at the bottom of the newsletter to forward it on. Click on this link > Origin Int'l April 2013 Newsletter